Samsung WF316LAW Скачать руководство пользователя страница 31

Страница: 31 / 104

4-8

4-2-9. Board Input Test Mode

Definition of Board Input Test Mode:

- Board Input Test Mode is to displays a specified input after a key press.

How to Enter:

- To enter the Board Input Test Mode, press the Extra Wash key during Special Test Mode.

(same for all Frontier models.)

Board Input Test Mode:

1. Activate the Special Test Mode first.

2. Press the Extra Wash key to start Board Input Test.

3. Water Temperature Display in Celsius Dial the Rotary Cycle Selector to “Heavy Duty” and press the Start/Pause dial.

4. Water Temperature Display in Fahrenheit Dial the Rotary Cycle Selector to “Normal” and press the Start/Pause dial.

5. Door Position (Open/Close) Display Dial the Rotary Cycle Selector to “Whites” and press the Start/Pause dial: “OP” will illuminate if open,

“CL” if closed.

6. Door Status (Lock/Unlock) Display Dial the Rotary Cycle Selector to “Perm Press” and press the Start/Pause dial: “UL” will illuminate if

unlocked, “LO” if locked.

7. Overflow Water Level Display Dial the Rotary Cycle Selector to “Delicate/Hand Wash” and

press the Start/Pause dial: “ ‾0 ” will illuminate if below level, “ ‾1 ” if above level (Overflow).

The above water level is defined as the overflow water level.

8. Heater-On Water Level Display Dial the Rotary Cycle Selector to “Wool” and

press the Start/Pause dial: “ -0” will illuminate if below level, “-1” if above level (Heater-On).

The Medium water level is defined as the level needed for the heater to turn on.

9. Reset Water Level Display Dial the Rotary Cycle Selector to “Quick Wash” and

press the Start/Pause dial: “_0” will illuminate if below level (Reset), “_1” if above level.

10. Water Level Display (Frequency) Dial the Rotary Cycle Selector to “Towels” and press the Start/Pause dial:

If it illuminates “2435”, it indicates 24.35 kHz.

11. AG Kit Status Dial the Rotary Cycle Selector to “Rinse+Spin” and press the Start/Pause dial.

Then, it will display the Ag Kit Status in 3 seconds: “- -” if AG kit is operated properly.

“7E” if AG kit is out of order (check wire harness & PCB)

12. MEMS Sensor Kit Status. Dial the Rotary Cycle Selector to “Spin Only” and press the Start/Pause dial. Then, it will display the MEMS

Sensor Kit status after displaying “00” for 3 seconds: “- -” if MEMS Sensor kit is operated properly.

“8E” if MEMS Sensor kit is out of order (check wire harness & PCB)

5HVHW:DWHU/HYHO

0HGLXP:DWHU/HYHO

+LJK:DWHU/HYHO

2YHUIORZ/(9(/

+HDWHU

Содержание WF316LAW









































































































Результаты поиска

Содержание WF316LAW

Отзывы:

Бренды по названию

Популярные бренды

Samsung WF316LAW, Руководство по обслуживанию

Результаты поиска

Содержание WF316LAW

Отзывы:

Бренды по названию

Популярные бренды