Samsung WF18T8000 Series, Руководство пользователя

Страница: 34 / 64

Engl
ish
English 34
Operations
Control panel
01
02
03 04 05 06
07
09
08
11
12
10
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03 Temp. Press to change the water temperature for the current cycle.
04 Rinse
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5, depending on the cycle.
05 Spin
Press to change the spinning speed for the current cycle.
•
Rinse Hold (No indicator): The final rinse process is suspended so
that the laundry remains in the water. To unload the laundry, run a
drain or spin process.
- To use the Rinse Hold option, press Spin repeatedly until all the
Spin option indicators turn off.
• No Spin : The drum does not spin after the final drain process.
- To use the No Spin option, press Spin repeatedly until the option
indicator ( ) turns on.
06 Options
Press to select an option from Intensive. Press again to deselect.
• Availability of the options depends on the cycle.
07 Bubble Soak
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
08 Delay End
Delay End lets you set the end time of the current cycle. Based on your
settings, the start time of the cycle will be determined by the machine’s
internal logic. For example, this setting is useful for programming your
machine to finish a wash at the time you normally return home from
work.
• Press to choose a preset unit of hours.
09 Add Garment Use this function to add laundry after the wash starts.
Untitled-3 34 2021-01-22 12:08:26