Installation
Installation
English
20
5.
Connect the other ends of the water
hoses to the corresponding inlets on the
rear of the machine as specified. Make
sure the hot water hose is connected to
the hot inlet, and the cold water hose to
the cold inlet.
6.
Repeat step 2 above on the other
fittings. Make sure both water hoses
are connected properly. See the ‘4C’
information code for troubleshooting.
7.
Open both faucets, and check if there is
a leak.
NOTE
If you do not want to use the hot water
hose, insert the inlet cap into the hot water
inlet. In this case, you must select Tap Cold
for the water temperature. All other water
indicators turn off.
CAUTION
To prevent water hoses from being bent or
kinked, make sure there is at least a 6 inch
(150 mm) space between the washer and
the rear wall.
WF16J6500EV_DC68-03665C_EN.indd 20
2017/10/20 14:27:52
Содержание WF16J6
Страница 1: ...Washing Machine User manual WF16J6 WF16J6500EV_DC68 03665C_EN indd 1 2017 10 20 14 27 49 ...
Страница 54: ...Specification Specification English 54 WF16J6500EV_DC68 03665C_EN indd 54 2017 10 20 14 28 00 ...
Страница 55: ...Specification English 55 WF16J6500EV_DC68 03665C_EN indd 55 2017 10 20 14 28 00 ...