Samsung WF-R1061 Скачать руководство пользователя страница 6

Страница: 6 / 70

■ Grounding

Make sure to ground the unit to prevent electric leak

age or shock.

With a grounded receptacle

It does not need an additional grounding.

■ Water Drainage

Hook the drain hose over the Wash Basin or Laundry

Tub or plug the end of the drai hose into the Standpipe.

- Hook the drain hose over the Wash Basin or

Laundry Tub or plug the end of the drain hose

into the Standpipe.

- The outlet end of the drain hose must be at

least 60-90 cm above the base of the machine.

Seal the drain pipe connections.

- If not, it may cause water leakage.

Prevent water from siphoning away.

- If the end of the drain hose is put in water,

it could siphon away water during washing.

So, make sure that the end of the drain hose

is not put in water.

Note: Caution must always be exercised to

avoid collapsing or damaging the drain hose.

For best performance the drain hose should

not be restricted in any way, through elbows,

couplings or excessive lengths.

All manuals and user guides at all-guides.com

all-guides.com

Содержание WF-R1061







































































Результаты поиска

Содержание WF-R1061

Отзывы:

Похожие инструкции для WF-R1061

Бренды по названию

Популярные бренды

Samsung WF-R1061, Руководство по обслуживанию

Результаты поиска

Содержание WF-R1061

Отзывы:

Похожие инструкции для WF-R1061

Бренды по названию

Популярные бренды