manualshive.com logo in svg

Samsung WF-R1061/YLP, Руководство по обслуживанию

Поделиться
Скачать
Samsung WF-R1061/YLP Скачать руководство пользователя страница 6

3

■ Grounding

Ć

 Make sure to ground the unit to prevent electric leak  

     age or shock.

Ć

 With a grounded receptacle

     It does not need an additional grounding.

■ Water Drainage

Ć

 Hook the drain hose over the Wash Basin or Laundry

     Tub or plug the end of the drai hose into the Standpipe.

-    Hook the drain hose over the Wash Basin or 

     Laundry Tub or plug the end of the drain hose

      into the Standpipe.

-    The outlet end of the drain hose must be at 

     least 60-90 cm above the base of the machine.

Ć

 

Seal the drain pipe connections.

-     If not, it may cause water leakage.

Ć

 Prevent water from siphoning away.

-    If the end of the drain hose is put in water,

     it could siphon away water during washing. 

     So, make sure that the end of the drain hose 

     is not put in water.

   Note: Caution must always be exercised to 

     avoid collapsing or damaging the drain hose. 

     For best performance the drain hose should 

     not be restricted in any way, through elbows, 

     couplings or excessive lengths.

Содержание WF-R1061/YLP







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды