CHAPTER 5. WLAN Management
© SAMSUNG Electronics Co., Ltd.
page 262 of 689
5.4 DHCP Configuration
The DHCP service of APC consists of DHCP server, DHCP relay, and DHCP proxy.
5.4.1
DHCP Server
5.4.1.1
DHCP Server Configuration
A DHCP server in the APC dynamically allocates an IP address to a client.
Configuration using CLI
1) Go to the configure mode of the CLI.
WEC8500# configure terminal
WEC8500/configure #
2) To enable or disable the DHCP server, enter the ‘ip dhcp’ command. Use ‘no’ in front
of the command to disable the configuration.
ip dhcp enable
no ip dhcp enable
3) To check configuration information, use the ‘show ip dhcp’ command.
Configuration using Web UI
In the menu bar of
<WEC Main window>
, select
<Configuration>
and then select the
<DHCP>
<Internal Server>
menu in the sub-menus.
Figure 144. DHCP server configuration
Enable/Disable the DHCP SERVER SERVICE item in the Internal Server window to
enable or disable a DHCP server.
Содержание WEC8500
Страница 1: ...Ver 2600 00FK1RGA4 8 0 WEC8500 WEC8050 APC Operation Manual ...
Страница 153: ...CHAPTER 3 Data Network Function SAMSUNG Electronics Co Ltd page 153 of 689 Figure 75 Device Statistics Screen ...
Страница 304: ...CHAPTER 6 Wi Fi Configuration SAMSUNG Electronics Co Ltd page 304 of 689 Figure 172 AP Group Contry Code Configuration ...