![Samsung WD80N6 Series Скачать руководство пользователя страница 64](http://html.mh-extra.com/html/samsung/wd80n6-series/wd80n6-series_user-manual_1197623064.webp)
64 English
Tr
ouble
shoo
ting
Troubleshooting
Code
Action
UC
The electronic control needs to be checked (Over Voltage Error).
•
Check the PCB and wire harness.
•
Check if power is supplied properly.
•
If the information code remains, contact a customer service
centre.
Low voltage detected
•
Check if the power cord is plugged in.
•
If the information code remains, contact a customer service
centre.
HC
High temperature heating check
•
If the information code remains, contact a customer service
centre.
1C
The Water Level sensor is not working properly.
•
Try power off and restarting the cycle.
•
Check WaterLevel Sensor wire harness.
•
If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the “1C” code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
8C
The MEMS sensor is not working properly.
•
Turn the machine off, and restart the cycle.
•
If the information code remains, contact a customer service
centre.
AC
Check communications between main and sub PBAs.
•
Try power off and restarting the cycle.
•
If the information code remains, contact a customer service
centre.
AC6
Check communications between main and inverter PBAs.
•
Depending on the state, the machine may automatically returns
to normal operation.
•
Turn the machine off, and restart the cycle.
•
If the information code remains, contact a customer service
centre.
WD90N644OOW_03924L-00_EN.indd 64
2018/3/1 11:27:06