Disassembly and Reassembly_25
Part name
Description
Figure
Removing
the Duct
(Replacing
the Dry
Motor)
3. Remove the screw.
√
Check Points for Troubleshooting
1. Revolve the dry motor manually and check whether Spin the dry motor
manually and check that it rotates freely.
2. Measure the internal resistance (between the white and blue wire termi
-
nals)
→ several Ω: short-circuited, ∞: disconnected
Removing
the Duct
(
THERMO-
STAT)
1.
Remove the connector.
Remove the jacks connected to
the thermostat and remove the
four (4) screws, as shown in the
figure.
√
Check Points for Troubleshooting
●
Measure the resistance between both ends of the thermostat: 0 Ω
→ If th e stud is raised due to overheating and it is pressed, it will be re
-
turned to the original position with a ‘snapping’ sound
.
Removing
the Duct
(
THERMIS-
TOR)
1. Remove the two (2) screws
connected to the dry duct and
remove the white thermistor.
WD6500K_7-8-9-11kg_1400rpm-SM.indb 25
2018/11/9 9:53:18
