
Engl
ish
Installation
English
26
C
3.
Hold the adaptor and turn
part (C)
in the arrow
direction to loosen it by 5 mm (*).
C
4.
Insert the adaptor onto the water tap, and then
tighten the screws while lifting the adaptor.
5.
Turn
part (C)
in the arrow direction to tighten it.
D
6.
While pulling down
part (D)
on the water hose,
connect the water hose to the adaptor. Then, release
part (D)
. The hose fits into the adaptor with a clicking
sound.
7.
To complete connecting the water hose, see 2 and 3
on the “
Connecting to a threaded water tap
” section.
NOTE
• After connecting the water hose to the adaptor, pull the water hose down to check if it is connected
properly.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the spacer ring before
inserting the tap into the adaptor.
Untitled-7 26
2023-05-04 5:21:27