3
1-2-7 After Repair
a) Confirm the level of washing machine. When
leveling, left & right side leveling should be
performed after front side leveling. (In case that
the machine is not leveled, excessive vibration
may occur.)
b) Level the machine with leveling legs.
◎
Pull down the handles of leveling legs in
front side,
◎
level the machine
◎
after leveling, push back the handles of
leveling legs.
Caution
Do not kick or step on the handles of the
leveling legs.
c) Install the washer on sturdy flat surface.
d) When the lower wiring is arranged, it should be
arranged not to be tensioned in case that the
tub assembly is biased to one side.(When the
tension is not considered, that may cause
vibration and noise.)
e) The wiring and connector should be kept dry.
(Otherwose, that may cause fire and short circuit.)
Leveled
Un leveled
Handle of
leveling leg
Pull
Push
WIRE HOLDER
Check the level with position of spin
basket on opening the door.
