Samsung WAPM07GG8 Скачать руководство пользователя страница 12

Method of Installation

E-

12

Before installation, be sure to check the installation area
for the air conditioner, and installation method of the drain hose.

Checkpoints prior to installation

Check the cabinet and front grille of the unit for any harmful defects
such as scratches.

1

Be sure to check the power supply.

- Refer to the specifications on the label attached to the unit.

2

Installation Conditions

As the unit is heavy, the wall or window of the installation area should
have sufficient strength and durability for operation of the air conditioner,
and for prevention of any vibration or noise.
If it is weak, reinforcement work should be performed separately.

1

It is advisable to install the air conditioner in the north or west side to
prevent the effect of direct sunlight.
When installing it in the south or east side due to unavoidable 
circumstances, it is advisable to install the sunshade to prevent the 
direct sunlight.
In this case, take care not to cause any hindrance to the flow of outside air.

2

When installing the air conditioner, be sure to obtain sufficient space on
the rear side of the unit for smooth flow of air.
When operating the air conditioner in closed areas such as inner building 
with cooling operation, and result in trouble with the unit.
See the illustration below.

3

500mm

500mm

75mm

min.

300mm

500mm

Fence, wall
or other 
obstacle

150mm min.

240mm

Approx.3

˚

Awning

750mm

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

◆ 

If the wall is greater than 150mm thick, 

cut the wall back on a 45˚ angle if possible.

100mm or more

45˚

45˚

Outdoor side

Indoor side  

Содержание WAPM07GG8

















Отзывы: