- 8 -
■
SPEEDY(THOBE) COURSE
If you want to wash those frequently used towels or less dirty laundry time.
Because washing is speedy, it is good for light or less stained laundry.
1. Press the power button to “ON”.
2. Press the course select button three times.
3. Press the START/HOLD button.
Water level is selected automatically. Washing, rinsing, and spinning follow. If you
want to pause, press the START/HOLD button again. You can change the course
when paused.
4. Close the lid.
■
WOOL COURSE
Washable sweater, cardigan, delicate clothes etc.
1. Press the power button to “ON”.
2. Press the course select four times.
3. Press the START/HOLD button.
Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD
button again. You can change the course when paused.
4. Close the lid.
CAUTION…
−
Do not use water above 30
°
C For WOOL washing.
−
Refer to the tag attached on the clothes for washing information.
−
Fasten buttons and turn inside out before washing.
−
Use the detergent indicated in the laundry.
−
When the degree of dirt is extreme, soak the laundry in warm water for
about 10 minutes before pressing the WOOL course button in order to
enhance washing efficiency.
■
DELAY START
How to reserve washing?
Select this course when you have to go out or do something else.
1. Press the power button to “ON”.
2. Press the course select button.
3. Press the DELAY START button once.
You may change the delay start time with use the DEALY START button.
(from 3 hours to 18 hours)
4. Press the START/HOLD button and put the proper amount of detergent into
tub.
5. Close the lid.
The washing finishes by the time you reserved.
Add detergent and softener in proportion to the water level. Then, close the
lid.
•
Must add the detergent in the detergent box.
•
If the detergent is spread on the laundry directly, some clothes may get
discolored as the start delays.
•
If the Delay Start needs to be canceled, press the power button.
•
The reserved finish time may be changed depends on the water pressure.
■
SUPER CLEAN
Use for cleaner washing.
1. Press the power button to "ON".
2. Press the SUPER CLEAN button.
3. Press the START/HOLD button and put the proper amount of detergent into tub.
−
Water level is selected automatically.
−
Water level is only selected MAXIMUM~MEDIUM.
4. Close the lid.
−
The washing finishes by the time you reserved.
■
CLEANING THE TUB
1. Press the POWER button.
2. Press the COURSE button to select the BLANKET course.
3. Press the FUNCTION button to select SOAK.
You can select the water supply or temperature (hot/cold).
4. Press the WATER LEVEL button to select MAXIMUM.
5. Press the START/HOLD button.
6. Add a dedicated detergent and close the lid.
−
Never place laundry in the tub when cleaning inside the tub,
as this can cause discoloration or damage to the laundry.
−
When doing the laundry after cleaning the tub, you may find
some impurities. These are just detergent residues and
impurities after the tub cleaning. Perform the rinse cycle two
to three times.
