HOW TO CLEAN THE FILTER
9
CLEANING THE FILTER NET
HOW TO ADD THE FABRIC SOFTENER
●
When a proper amount (one time does) of fabric
softener is stored in the softener inlet,it is
automatically put in at the last rinsing cycle.
●
Do not use detergent, bleach or starch into the Softener Inlet.
●
Using too much softener may produce unsatisfactory results.
●
Do not open the lid during the Spin Dry cycle.
If added too early, its effectiveness
will decrease.
●
Do not leave the softener into the
Softener Dispenser for a long time.
Because softner became stiff.
Pour it slowly
1.Push the upper part of
the filter and pull in.
2.Open the cover as
shown in the figure.
3.Clean the filter.
4. Close the cover and insert the lower
part of the filter in the basket first and
then push the filter with "click" sound .
1
. Place a rag under the washer filter not to wet
the floor.
2
. Rotate the filter counterclockwise and pull
out the filter.
3
. Remove dirts and rotate the filter clockwise
until it locks in position.
1
.Open the detergent box by pulling in the
direction of the arrow as shown in the
figure and then put the powder detergent
in the detergent box.
2
.Put in one-time amount
of detergent evenly
so the detergent may
not brim over the box.
HOW TO PUT THE DETERGENT IN
WA8565B0-GB-01087A 01.4.28 9:29 AM 페이지9
