11
Please clean the filter net often: Pull out the filter net in the inlet water valve and clean the dirt on it with a brush.
Insert it into the valve after being washed with water.
NOTICE:
The dirt on the filter net will produce some problems, like water not
supplied or only little flow of water supplied. After clean it, please be
sure to insert the filter net into the valve.
CONNECTING THE DRAIN HOSE
The drain hose is normally connected on the right side of the machine. Consumers can refit it on the bit if necessary.
NOTICE:
Before refit, the power supply must be cut of (For the danger of getting an electric shock)
1.
Remove the screws and take down the back
cover.
Remove the screws,and take down the left cap.
2. The removal of the linking pipe
Remove the screws on the drain mouth, then press
the linking pipe and take down the drain mouth from
the shell of the box.
Pull up the fixed part to make it apart from the shell.
3. The installation of the linking pipe
Press the linking pipe then insert the drain mouth
into the box shell and fix it with the screws.
Press the fixed part then insert into the hole in the
middle of box.
NOTICE:
When inserting the linking pipe, it can't be twisted or tied.
If the linking pipe is wrongly installed, there will be water leaking.
CLEANING THE FILTER NET
1
2
3
1
2
Cap
2
1
4.
Fit the back cover.
Aim the cap at the cavity in the shell of the
box then fix it with the screw.
Connect the drain hose.
1
2
