HOW TO SELECT WOOL COURSE?
Washable sweater, cardigan, delicate clothes etc.
1. Add the laundry in and press the
button.
• The laundry should be less than 2kg.
2. Press the course button.
• Select Wool course.
• If the laundry is light compared
to its size, choose the proper water
level by your judgment. (Since the machine indicates only above the lowest
water level.)
• Select the proper water level in proportion to the amount of laundry.
3. Press the
button.
Add detergent and softener in proportion to the water level. Then, close the lid.
• The last spinning cycle runs very softly in order to avoid severe wrinkles.
• Only cold water is allowed.
• Use a neutral detergent.
• At every course, both cold and hot water can be selected by
pressing water supply button. (Except, wool course is allowed for
cold water only.)
HOW TO SOAK WASHING?
If the laundry has aged dirt and needs a soft soak wash
1. Add the laundry in and press the
button.
• The laundry should be less than 2kg.
2. Press the course button.
• Select the desired course.
• Select either cold water or hot water
by pressing the water supply button.
3. Press the Function button
• elect Soak Course.
• Add 30 minutes of soaking to the
selected course.
3. Press the
button.
• At the soak wash, the machine repeats itself starting 1 minute and stopping
4 minutes (soaking) until the main washing.
Add detergent and softener in proportion to the water level. Then, close the lid.
HOW TO RESERVE WASHING?
Select this course when you have to go out or do something else.
1. Add the laundry in and press the
button.
• Check if the faucet is open.
2. Press the Delay Start button.
1) It adds I hour in every 3 hours and
can be selected up to 18 hours.
2) It stops washing after the selected time.
• Other course can be selected.
3. Press the
button.
Add detergent and softener in proportion to the water level. Then, close the lid.
• Must add the detergent in the detergent box.
• If the detergent is spread on the laundry directly, some clothes may get
discolored as the start delays.
• If the Delay Start needs to be canceled, press the power button.
• The reserved finish time may be changed depends on the water pressure.
- 8 -
WM-01400-inne-colour 2/14/02 11:32 AM Page 8
