![Samsung WA75G9T Скачать руководство пользователя страница 17](http://html.mh-extra.com/html/samsung/wa75g9t/wa75g9t_user-manual_1197511017.webp)
16_manual functions
installation & maintenance _17
installation & maintenance
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
envIronmenT
leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the washer is directly exposed to rain. Moisture may
destroy the electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic an electrical components are affected by direct heat, never place the washer near furnaces,
boilers, etc. Do not place under direct sunlight.
levellInG
• If the washer is not leveled with the ground, it makes the machine tremble more or be out of order. So,
make sure that the washer is leveled properly.
see If The mAChINe Is PlACeD leVel by CheCkING
The POsITION Of The WAshING TUb.
•
Open the lid of the machine, pour water into the tub up
to the level just below the pulsator, and adjust the legs so
that the pulsator is positioned at the center of the water as
shown in the figure.
•
Place the machine more than 10cm away from the wall.
•
Adjust the legs on feet for levelling.
connecTInG The WATer supply hose
1.
If the water tap is a screw type, assemble a water supply
hose that fits to the tap as shown. After completing
connection, if water leaks from the hose, then repeat the
same steps.
2.
Connect the other end of the water supply hose to the
inlet water valve at the back of the washer. Screw the hose
clockwise all the way in.
After completing connection, if water leaks from the hose, then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big, remove the spacing ring before inserting the faucet
into the adaptor.
03
Ins
TA
ll
ATI
on & m
AI
n
T
en
A
nce
Water
LOOSEN
LOCK
WA75G9TIP-02961M-01_EN.indd 17
2012-11-16 �� 6:04:37