English 13
Ins
tallation
Step-by-step installation
STEP 1
Select a location
Location requirements:
•
Solid, level surface without carpeting or flooring that may obstruct ventilation
•
Away from direct sunlight
•
Adequate room for ventilation and wiring
•
The ambient temperature is always higher than the freezing point (0 ˚C)
•
Away from a heat source
Assembling the rat protection panel (applicable models only)
Tilt the washer a little, insert the shutter and finally fix the shutter with screw to the base as
shown in the picture.
Rear Side
1.
Insert the rat protection panel to the
assembling hole on back side to the end.
2.
If you have difficulty inserting the panel
lift up the washer a little and insert it.
WA4000MK-03843A-00_EN.indd 13
4/13/2017 11:02:06 AM
