Samsung WA54M8750 Series, Руководство пользователя

Страница: 37 / 228

English 37
W
ashing a load o
f laundry
Options
Child Lock
To prevent children or infants from
accidently starting or setting the washer,
Child Lock locks all buttons except for the
POWER button.
Activating the Child Lock function
Press and hold Temp. and Spin
simultaneously for approximately 3 seconds.
• When you activate the Child Lock
function, the
Child Lock indicator
blinks.
Using the Child Lock function
If the lid is opened when the Child Lock
function is on, “
dC ” is displayed and an
alarm sounds.
• If the water level in the tub is above the
safe water level, “
dC ” is displayed on the
LED display and the washer starts to
drain water by force after 30 seconds.
• If the water level in the tub is above
the safe water level and the Child Lock
function is turned on while the lid is
open, “
CL ” is displayed on the LED
display even if the washer is turned off
and the washer drains water by force.
• When Child Lock is on and the washer is
off, if the water in the tub is above the
Reset water level and the lid is opened,
“
CL ” is displayed on the LED display.
No alarm sounds, but the washer drains
the water. When the draining operation
finishes, the power automatically turns
off again.
• If you activate the Child Lock function
while the washer is running, the
START/
PAUSE button will not work.
• After the compulsory drain, the “ CL ”
blinks at 1 second intervals and the
washer enters the “
CL ” mode. (When
the washer is in the “ CL ” mode, only the
POWER button works.)
• To cancel the “ CL ” mode, turn the power
off and then on again.
• To cancel the “ dC ” mode, deactivate
the Child Lock function. To deactivate
the Child Lock function, press and hold
Temp. and Spin simultaneously for at
least 3 seconds.
NOTE
Adding laundry when Child Lock is on
To add laundry, deactivate the Child Lock
function. To deactivate the Child Lock
function, press and hold
Temp. and Spin
simultaneously for at least 3 seconds. See
the “
Pause Option ” section on page 43 for
additional details.
Deactivating the Child Lock function
Press and hold both Temp. and Spin
simultaneously for approximately 3 seconds.
• When you deactivate the Child Lock
function, the
Child Lock indicator is
turned off.
• The Child Lock function prevents
children or the infirm from accidently
operating the washer and injuring
themselves.
WARNING
If a child enters the washer, the child may
become trapped and suffocate.
WA8700M_DC68-03774B-04_EN.indd 37 2019-02-14 5:37:17