Disassembly and Reassembly _ 13
Part
Figure
Description
Top Cover Assembly
/ Door Switch
1. Remove the 2 screws from the cover
plate.
2. Separate the control panel assembly.
3. Separate the Assy Valve Water, the main
PBA, the Assy Sensor Pressure and the
filter EMI housing.
Separate the housing to prevent
stress and damage to the wire-
harness.
4. Separate the main wire harness, the
pressure switch hose clip , Grounding
screw .
5. Release the bleach hose clamp.
6. Separate the top cover assembly by
lifting and pushing ahead the top part of
the assembly.
7. you can check the door switch If turn the
Top cover upside down.
Sensor Pressure
Switch
1. Disassemble the control panel assembly.
2. Separate the pressure switch housing.
3. Before separating the hose, release the
clip.
When releasing the clip, take care
that you do not tear the hose.
Hudson Washer.indb 13
2012-03-28 �� 9:45:53
