Samsung WA50K8600AV Скачать руководство пользователя страница 4

16 English

Ins

tallation

Installation

Basic location requirements

Electrical

ŷ

120 Volt 60 Hz 15 AMP fuse or circuit 
breaker.

ŷ

Individual branch circuit serving only 
your Washer is recommended.

ŷ

Your washer is equipped with a power 
cord.

CAUTION

Never use an extension cord.

Grounding

Electrical grounding is required for this 
appliance.

This appliance must be grounded. In 
the event of malfunction or breakdown, 
grounding will reduce the risk of electric 
shock by providing a path of least resistance 
for electric current.
This appliance is equipped with a power 
cord having a three-prong grounding plug 
for use in a properly installed and grounded 
outlet.
The plug must be plugged into an 
appropriate outlet that is properly installed 
and grounded in accordance with all local 
codes and ordinances.

WARNING

An improperly connected equipment-
grounding conductor can increase the risk 
of electrical shock. Check with a qualified 
electrician or serviceman if you are not sure 
whether the appliance is properly grounded. 
Do not modify the plug provided with the 
appliance – if it does not fit the outlet, have 
a proper outlet installed by a qualified 
electrician.

Important safety precautions

To prevent unnecessary risk of fire, 
electrical shock or personal injury, all wiring 
and grounding must be done in accordance 
with the National Electrical Code ANSI/
FNPA, No.70 Latest Revision and local 
codes and ordinances. It is the personal 
responsibility of the appliance owner to 
provide adequate electrical service for this 
appliance.

CAUTION

Never connect the ground wire to plastic 
plumbing lines, gas lines, or hot water pipes.

Water

To correctly fill your Washer in the proper 
amount of time, water pressure of 20 to 
116psi (137 to 800kPa) is required.
Water pressure less than 20 psi may cause 
water valve failure, or may not allow the 
water valve to shut off completely, or may 
extend the fill time beyond what your 
Washer controls allow, causing your Washer 
to turn off. A time limit is built into the 
controls to prevent flooding in your home if 
a hose becomes loose.

WA8700K_WA50K-03647A-03_EN.indd   16

2016/7/22   10:19:25

Содержание WA50K8600AV









Отзывы: