32 English
W
ashing a load o
f laundry
Washing a load of laundry
NOTE
Adding laundry when Child Lock is on
To add laundry, deactivate the Child Lock
function. To deactivate the Child Lock
function, press and hold
Water Level
and
Power Wash
simultaneously for at least 3
seconds. See the “
Pause Option
” section on
page
34
for additional details.
Deactivating the Child Lock function
Press and hold both
Water Level
and
Power
Wash
simultaneously for approximately 3
seconds.
•
When you deactivate the Child Lock
function, the
Child Lock
indicator is
turned off.
•
The Child Lock function prevents
children or the infirm from accidently
operating the washer and injuring
themselves.
WARNING
If a child enters the washer, the child may
become trapped and suffocate.
CAUTION
•
Once you have activated the Child Lock
function, it continues working even if
the power is turned off.
•
Forcing the lid open can result in injury
or damage to the product.
NOTE
To add laundry after you have activated
the Child Lock function, you must first
deactivate the Child Lock function.
Sound
The Sound Off function can be selected
during all cycles.
Garment Plus
You can add or take out laundry items even
after the wash has started, as long as the
Garment Plus
indicator is on. Pressing
Start/Pause
unlocks the lid. If you open the
lid and want to continue the wash cycle,
close the lid, and then press
Start/Pause
.
Delay End
You can set the washer to start your wash
automatically at a later time, by choosing a
delay time.
The hour displayed indicates the time at
which the wash will be ended.
1.
Set your wash cycle.
2.
Press
Delay End
repeatedly until the
delay time is set.
3.
Press
Start/Pause
. The “Delay End”
indicator will be lit, and the clock will
begin counting down until it reaches the
set time.
4.
To cancel a Delay End function, press the
Power button and then turn the washer
on again.
Pre Soak
Use this function when the laundry is
heavily contaminated or stained. This
function improves the wash performance by
adding a Pre Soak cycle.
•
If you select this function, the total cycle
time is increased by 10 or 20 minutes.
•
When the Pre Soak cycle starts, the
washer repeats a wash cycle after
supplying water and then performs a 10
or 20 minute soak cycle.
•
When the Pre Soak cycle is complete,
the configured wash cycle starts without
draining water.
WA8700J_WA22J8700GP-03133Z-02_YL_EN.indd 32
2015/7/25 16:55:32
