5
(5) RINSE-ONLY function
①
If this key is pressed before pressing START key at the initial stage, it will select the RINSE-ONLY
function. Input of START key at this time will perform the RINSE-ONLY function, and every touch of this
KEY will change the number of rinse as follows.
2 times
→
3times
→
4times
→
5times
→
1time( For small dirt, lower than MEDIUM/LOW WATER LEVEL)
②
The display during the RINSE CYCLE is as follows.
○ “
RINSE
”
: ON/OFF for 1 sec
○
The remaining time will be displayed on the 8SEGMENTs.
(6) WASH+RINSE ONLY function (availably selectable at each course)
①
Before input of the START key, touching the WASH key and the RINSE key will select the WASH+RINSE
ONLY function. After input of the START key, each key has the same function with the WASH-ONLY key
and the RINSE-ONLY key to control the time of washing and the number of RINSE, respectively. (The time
of washing and the number of rinse can be changed before pressing the START key.)
②
The lamp of that cycle in progress is lighted ON/OFF for 1 second.
(7) RINSE+SPIN ONLY function (availably selectable at each course)
①
Before input of the START key, touching the RINSE key and the WASH key will select the
RINSE+SPIN ONLY function. After input of the START key, each key has the same function with
the RINSE-ONLY key and SPIN-ONLY key to control the number of RINSE and the time of
spin, respectively. (The number of rinse and the time of spin can be changed before
pressing the START key.)
②
The lamp of that cycle in progress is lighted ON/OFF for 1 second
※
The WASH, RINSE, SPIN KEYS are always effective before the end of that cycle, except for the
operations such as the intermittent spin, the spin, and the HOLD.
EX) The WASH key is effective before the end of washing function.
※
During the MANUAL operation, input of other manual keys will make a sound of pressing a key without
performing any function.
