setting up your washer
_9
setting up your washer
_9
WASH BUTTON
Press this button to only perform a wash cycle or to adjust the wash time.
SOAK BUTTON
Press this button to perform a soak wash.
This function cannot be selected during a Wool program. Soaking is
automatically applied during a Clean tub program.You can set the soak
time from between 20 to 60 minutes.
WATER LEVEL
BUTTON
The water level is automatically adjusted. However, you can select the
water level manually by repeatedly pressing this button.
WATER SUPPLY
BUTTON
Press this button repeatedly to cycle through the water options:
Cold
Æ
Cold & Hot
Æ
Hot
Æ
Cold
POWER WAVE
You can select the water stream type.
High
Æ
Low
Æ
off
Æ
High
You can change the setting depending on the course.
You cannot change the setting during a spin cycle.
DELAY START
BUTTON
Press this button to fi nish the wash at a specifi ed time. Turn your washer off
to cancel a previously delayed start time.
You can set the delayed start time from between 3 to 19 hours.
LAST SETTING
BUTTON
Selects this course to load the settings for the last course.Perform a wash
course using the last used settings without having to enter them manually
again. Your choices are automatically saved when you press the Start/
Pause button. To use a memorized course, press the Last Settings button
and then press the Start/Pause button.
Programs and options vary by model, but the control panel on your washer is similar to what’s shown on
page 9.
@
Wobble Washing
This is an innovative wash concept with rotating and vertical water streams through the installation of the wobbler.
•
Since the left, right, up and down water streams are used at the same time, the water stream may
appear to be smaller than a conventional washer.
•
Due to the beating eff ect of the wobbler, a wash is performed with less water than a conventional
washer.
01 SETTING UP Y
OUR W
ASHER
12
13
14
11
9
10
8
WA17GWGIH-02685M_EN.indd Sec3:9
WA17GWGIH-02685M_EN.indd Sec3:9
2011-12-06 3:39:20
2011-12-06 3:39:20
