HOW TO CONNECT THE DRAIN HOSE
How to change the drain hose direction
• The handle of joint ring is pressed to pull out the
drain hose. Change the direction of the drain
hose and follow the above guideline again.
Cautions when inserting the drain hose
1. Don't exceed more than 3m when the drain
hose is used by connecting with other
hoses.
2. Be careful to drain water out at the end of
the drain hose.
3. The doorsill shouldn't be more than 5cm.
4. Don't install the drain hose underneath the
wash machine.
ASSEMBLING THE RAT PROTECTION PANEL
Tilt the washer a little and lift up the
panel until it clicks, finally fix the
panel with screw to the base as
shown in the figure.
TROUBLESHOOTING
1.
After pressing the joint
ring, insert to the drain
hose.
2.
After directing the
drain hose to a drain,
join to the drain-outlet
of the washing
machine.
3.
Be sure to join them
tightly by pressing the
joint ring and pushing it
into the drain-outlet.
•
The length of drain hose
is adjustable so that you
can extend the length
appropriately.
- 13 -
drain-outlet
Rear-side
Less than 3m
Less than 3m
Less
than 5m
1. Insert the sound
absorbing panel
to the assembling
hole on front side
to the end.
2. If you have difficulty
inserting the panel
lift up the washer a
little and insert it.
Washing machine won't work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
Water is not supplied
Is the water tap
opened?
Is the water cut off?
Is the water supply
hose or hose
connection clogged?
Is the water tap frozen?
If water is not supplied in
1 hour, a buzzer will sound, and the
remaining time indicator will show "7E"
and "4E".
Water dose not drain
Is the drain hose
down?(No pump)
Is the drain hose
frozen?
Is the drain hose
clogged?
If the water dose not drain in 15
minutes, a buzzer will sound,
and the remaining time indicator
will show "5E” and “E”.
Spinning does not work
Is the laundry
spread out
evenly
in the washer?
Is the washer
set on a sturdy
flat surface?
