10_setting up your washer
setting up your washer_11
remaining Time,
Delay sTarT
Time, error
Display
Displays the remaining wash time.
Displays the reserved delay start time.
Displays the error state if a problem occurs in the washing machine so that
you can take action.
soak buTTon
Press this button to perform a soak wash.
You can set the soak time from between 10 to 60 minutes.
Delay sTarT
buTTon
Press this button to finish the wash at a specified time.
Turn off your washing machine to cancel a reserved delay start.
You can set the delay start time from between 3 to 19 hours.
lasT seTTing
Press this button to load the settings for the last course.
Perform a wash course using the last used settings without having to enter
them manually again.
Your choices are automatically saved when you press the Start/Hold button.
To use a memorized course, press the Last Settings button and then press
the Start/Hold button.
- The memorized functions will be displayed on the panel.
The Delay start and Water level settings are not automatically saved
and will be reset after the wash.
waTer leVel
buTTon
The water level is automatically adjusted. However, you can select the water
level manually by pressing this button.
waTer supply
buTTon
Each press of the button cycles through the type of water,
Cold
Cold + Hot
Hot
Cold
01
SETTI
ng
U
p
y
OU
r
W
ASHE
r
10
11
12
13
9
14
CAUTION
WA12B9DEP-02961J-01_EN.indd 11
2012-12-18 �� 4:43:11
