Samsung Electronics
8-
Alignment and Adjustment
q
The camera should be in "E-E" mode (Video Record).
w
Make the focus chart.
e
Ensure that camera is left an about 3m distance from a focus chart and the focus of lens
is placed vertically. Attatch a focus chart to white or gray wall of a flat surface.
r
Connect the AV cable to Input port of Monitor or TV.
t
Press the OK button after entering "Camera Adjust".
- Press the OK button in "Lens" menu.
- Press the OK button in "YES" .
- Don't force the zoom and focus lens when setup.
y
Adjustment completed!"displays after finishing Lens 3M Adjust.
Caution : For whole zoom range, it shall be in focus. The location of a focus lens is moving depending on the location of
Zoom Lens. During Adjusting, micom measures the focus location from a near distance to a long.
Fig. 8-3
3. Auto LENS control
4. Zoom VR Check
q
Connect the AV cable to Input port of vector scope and TV.
w
Press the OK button after entering "Camera adjust".
- Press the OK button in "Zoom VR" menu.
- Press the OK button in "YES" menu.
e
Then Micom finds out Zoom VR Center position. Store Zoom VR Center Value
r
Adjustment completed!"displays after finishing VR check.
