ENGLISH
Advanced Recording
63
63
✤
The AUDIO DUBBING function only works in PLAYER Mode.
✤
You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.
✤
Use the internal and external microphones or other audio equipment.
✤
The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the camcorder.
■
When you wish to dub using the External A/V input, connect the
AUDIO/VIDEO cable to the camcorder by inserting the cable jack into the
A/V in/out terminal at the left side of the camcorder. (VP-D20i/D21i only)
-
Press the MENU button, turn the MENU DIAL to highlight A/V and press the
ENTER button.
-
Turn the MENU DIAL to highlight AV IN/OUT and press the ENTER button to
select AV IN.
2. Press the
(PLAY/STILL) button and find the timeframe of the scene to
be dubbed.
3. Press the
(PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
■
A.DUB will be displayed on the LCD.
■
The camcorder is in a ready-to-dub state for dubbing.
5. Press the
(PLAY/STILL) button to start dubbing.
■
Press the
(STOP) button to stop the dubbing.
Reference (VP-D20i/D21i only)
■
You can not use the audio dubbing function while playing a write protected video tape.
■
When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio system from
which you wish to record.
Audio dubbing
SA
MS
UN
G
CA
M
C
O
R
D
E
R
LE
N
S
10
X
ZO
O
M
SA
MS
UN
G
CA
M
C
O
R
D
E
R
LE
N
S
10
X
ZO
O
M
E A S
Y
R E C
S E
A R C
H
FA D
E
B L C
(VP-D20i/D21i only)
AV IN
Audio (R)
Audio (L)
