Samsung VP-A12, Руководство по обслуживанию

Страница: 46 / 163

Alignment and adjustment
Samsung Electronics 5-7
Note : On table you see the ÒXX XXÓ for DATA 1/DATA 2
ÒXX XXÓ means arbitrary value.
<Example of the TV screen>
E2 HALLA XX XX
Data in
memory
Data to be
adjusted
MODE OSD DATA1 DATA2 NAME OF ADJUSTMENT
DB 08 08 HALL CHECK(#D1) THRESHOULD
DC 82 82 COLOR ADJUST(#D1) TARGET VALUE
DD FF FF
DE FF FF
DF FF FF
E1 FF FF AGC AUTO ADJUST
E5 FF FF SETUP AUTO ADJUST(#02(18H)-#DA -> #02)
E7 00 00 INVERSE NUMBER OF VERTICAL ZOOM MAGNIFYING RATIO
E8 0C 0C CCD VERTICAL START POINT BY ZOOM:INTEGER LINES
E9 00 00 CCD VERTICAL START POINT BY ZOOM:SUB-PIXEL
EA 83 83 SHUTTER MODE,LOW SPEED CONTROL,Hi-SHUTT SPD
EB FF FF HIGH SHUTTER SPEED CONTROL
EF 00 00 FOR 680K CCD RG DELAY
F0 80 80 D/Z,EIS,EFFECT,VBLK DELAY AD,LBLK DELAY AD,SCKIV
F1 00 00 H ZOOM STEP.(0~192:X1~X4)
F2 00 00 V ZOOM STEP.(256~64:X1~X4)
F3 00 00 H START READ ADDRESS.(16BIT) H
F4 01 01 H START READ ADDRESS.(16BIT) L
F5 00 00 H ZOOM START SUB PIXEL(0~255)
F6 00 00 V ZOOM START SUB PIXEL(0~255)
F7 00 00 V ZOOM START SUB PIXEL(0~255)
F8 00 00 DVC DELAY
F9 00 00 DSE SELECT
FA 60 60 R VALUE OF SEPIA MODE:#FA=#20
FB 00 00 B VALUE OF SEPIA MODE:#FB=#21
FC 18 18 G VALUE OF SEPIA MODE:#FC=#22
FD 94 94 NEGA MODE TARGET:#75(EWC)=#8F,#71:00 -> 40
FE 98 98 NOISE SLICE START AGC
FF FF FF
MODE OSD NAME OF ADJUSTMENT DATA1 DATA2 MODELS
7A DELAY CONTROL SELECTION 3C 3C VP-A12, VP-A15
3F 3F VP-A17, VP-A18
7D XCK CT,OSIMSE,MMSEL,HSEL,VSEL,SCK CT,UVCK 06 06 VP-A12, VP-A15
00 00 VP-A17, VP-A18
7E SYNC C,EXT DA,C4:2:2,WIDE,LPF SE,PAL,Hi8,D/Z 05 05 VP-A12, VP-A15
07 07 VP-A17, VP-A18
E8 CCD VERTICAL START POINT BY ZOOM:INTERGER LINES 0C 0C VP-A12, VP-A15
1B 1B VP-A17, VP-A18
F0 DZ,EIS,EFFECT,VBLK DELAY AD,LBLK DELAY AD,SCKIV 80 80 VP-A12, VP-A15
CA CA VP-A17, VP-A18
F1 H ZOOM STEP.(0~192:X1~X4) 00 00 VP-A12, VP-A15
2C 2C VP-A17, VP-A18
F4 HORIZONTAL START READ ADDRESS(16BIT) L 01 01 VP-A12, VP-A15
15 15 VP-A17, VP-A18
Initial data by models.