6
REPLACING THE DUST BAG
FOR CLOTH FILTER BAG
NOTE:
Used dust bag can be sealed by
removing the film from the paper
and sticking the latter over the suction
opening. (ONLY PAPER BAG)
After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
1) To open the dust cover of the dust bag
compartment press the clamper upward
(The clamper is located at the front of the dust cover)
3) After removing the used dust bag, insert the
cardboard bag collar of the new dust bag
into the carrying bag.
2) Remove the carrying bag from the cleaner.
4) Press the dust cover down gently until the
clamper relocks.
CARRYING BAG
1) INLET-FILTER
❈
Open the dust cover.
❈
After detaching the filter, wash it lightly with
water, dry it in the shade, and then insert it in
its original position.
❈
Close the dust cover.
GRILLE-FILTER
OUTLET-
FILTER
INLET-
FILTER
MAINTENANCE OR REPLACEMENT OF THE FILTERS
2) OUTLET-FILTER
❈
The outlet-filter which the air comes out from the vacuum-cleaner.
❈
Open the dust cover, and then pull the hook upward. (The hook is located at the front
of the dust cover)
❈
Remove and replace the exhausted outlet-filter.
❈
Close the grille filter, and then close the dust cover.
DJ68-00079P(0.0) 4/23/02 8:54 PM Page 7
