background image

5

6

FOR CLOTH FILTER BAG

MAINTENANCE OR REPLACEMENT OF THE  FILTERS

REPLACING THE DUST BAG

1) To open the dust cover of the dust

bag compartment, press the 
clamper upward.
(The clamper is located at the front
of the dust cover)

2) Remove the carrying bag from the

cleaner.

;;

;;

yy

yy

NOTE: Used dust bag can be sealed

by removing the film from the
paper and sticking the latter
over the suction opening.
(ONLY PAPER BAG)

After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use
it again.

1) INLET-FILTER.
• Open the dust cover.
• After detaching the filter, wash it lightly with

water, dry it in the shade, and then insert it in 
its original position.

• Close the dust cover.

2) OUTLET-FILTER.
• Open the dust cover, and then pull grille-filter 

forward.

• Remove and replace the exhausted  outlet-filter.
• Push the grille filter, and then close the dust

cover.

;;;

;;;

;;;

yyy

yyy

yyy

;;

;;

;;

yy

yy

yy

;;;

;;;

yyy

yyy

3) After removing the used dust bag,

insert the cardboard bag collar of the
new dust bag into the carrying bag,
and then insert it in its original position

4) Press the dust cover down gently

until the clamper relocks.

CYCLONIC FILTER(ONLY CYCLONIC FILTER TYPES)

You can use a dust bag in your cleaner for a long time thanks to the Cyclonic
Filter system and it maintain the maximum cleaning efficiency.
The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel
when suctioned air and dust revolves in the Cyclonic Filter. So the dust bag
contains only smaller ones.
When the Dust Barrel is filled with dust up to the indicating line, it needs
disposing and cleaning.
Dust Barrel can be cleaned in water.

1. Turn the Dust Barrel to the left and pull it.
2. Disconnect the Cyclonic Filter from extension wand and handle.
3. Remove thread and hair tangled around the net.
4. After cleaning the Dust Barrel and Cyclonic Filter, connect the Cyclonic Filter

with extension wand and handle(washed part should be dried in the shade
throughly before assembling).

5. Push and turn the Dust Barrel to the right.

Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter.

CYCLONIC
FILTER

DUST BARREL

CREVICE 
TOOL

DJ68-00006Y(0.2)  10/25/03 1:15 PM  Page 6

Отзывы: