9
4. Cleaning the Brushroller
1) Turn off the vacuum cleaner and
unplug the power cord.
2) Remove the cover to expose the
brushroller.
3) Cut off any lint, carpet pile or hair that
has accumulated around the
brushroller with a pair of scissors.
Replace the brush cover.
3) Reinsert the brushroller, making
sure that both ends of the
brushroller are fitted into the
grooves of the nozzle head.
4) Be sure that the is not twisted. Rotate
the belt 3 or 4 times to position it correct-
ly on the roller and to make sure all rotat-
ing parts move smoothly. Replace the
brush cover.
1) Remove the brush cover, Grasp the
brushroller firmly, and pull it out.
2) Remove the flat belt from the motor
shaft and the brushroller, Loop the new
belt around the motor shaft and then
loop it around the brushroller.
DJ68-00079M(US) 7/28/01 2:06 PM Page 10
