Samsung UN32D6500VF Скачать руководство пользователя страница 73

Страница: 73 / 87

4-40

4. Troubleshooting

4-6. Software Upgrade

Software Upgrade can be performed by network connection or downloading the latest firmware from “

www.

samsung.com

” to a USB memory device.

By USB

Insert a USB drive containing the firmware upgrade file,

downloaded from “

www.samsung.com

” into the TV.

Please be careful not to disconnect the power or remove

the USB drive until upgrades are complete. The TV will be

turned off and on automatically after completing the firmware

upgrade. When software is upgraded, video and audio

settings you have made will return to their default settings.

We advise you to to write down your settings so that you can

easily reset them after the upgrade.

* The displayed menu may differ depending on the model.

By Online

Upgrades the software using the Internet.

● First, configure your network. For detailed procedures on using the Network Setting, refer to the ‘Setting the Network’

instructions.

● If The internet connection doesn’t operate properly, connection can be broken, please retry downloading.

If the problem still happens, download by USB and upgrade.

Alternative Software (Backup)

If there is an issue with the new firmware and it is affecting operation, you can change the software to the

previous version.

● If Software was changed, existing Software is displayed.
● You can change current Software to Alternative Software by ‘Alternative Software’.

Содержание UN32D6500VF
























































































Результаты поиска

Содержание UN32D6500VF

Отзывы:

Samsung UN32D6500VF, Руководство по обслуживанию, Страница: 73 / 87

Результаты поиска

Содержание UN32D6500VF

Отзывы: