background image

31

Samsung Electronics

Set Up the Model Option

7

8

9

10

11

12

7

8

Press          button, then the default value is       .

Push the          button to set the display panel to 

.

Every time you push the button, the display panel reads 

. . .

repeatedly.

Setting is not required if you must 

a value which has a 

default.

9

Push the          button to set the display panel to 

.

Every time you push the button, the display panel reads 

. . .

repeatedly.

10

Push the          button to set the display panel to 

.

Every time you push the button, the display panel reads 

. . .

repeatedly.

11

Push the          button to set the display panel to 

.

Every time you push the button, the display panel reads 

. . .

repeatedly.

12

Push the          button to set the display panel to 

.

Every time you push the button, the display panel reads 

. . .

repeatedly.

Step 3 : Upon completion of the selection, check you made right selections.

Press the Mode Selection key,

to set the display part to 

and check the display part.

The display part shows

.

Press the Mode Selection key,

to set the display part to 

and check the display part.

The display part shows

.

Step 4 : Pressing the ON/OFF button (

)

When pressing the operation ON/OFF key with the direction of remote control for unit, the sound ''Ding'' or ''Diriring'' is

heard and the OPERATION ICON(

) lamp of the display is flickering at the same time, then the input of option is com-

pleted. (If the diriring sound isn't heard, try again pressing the ON/OFF button.)

Step 5 : Unit operation test-run

First,

Remove the battery from the remote control.

Second,

Re-insert the battery into the remote control.

Third,

Press ON/OFF button(

) with the direction of remote control for set.

• Error Mode

1

st

If all lamps of indoor unit are flickering, Plug out, plug in power plug again and press ON/OFF key to retry.

2

nd

If the unit is not working properly or all lamps are continuously flickering after setting the option code, see if the correct option code is

set up for its model.

 22143A(4)_1  2/13/06 3:03 PM  Page 31

Содержание UH052EZMC







































































Отзывы: