Samsung UH052EAMC, Руководство по обслуживанию, Страница: 18 / 126

3-4 Samsung Electronics
The default value is .
Otherwise, push the button to .
Every time you push the button, the display panel reads or
repeatedly.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
 
  . . .        repeatedly.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
 
  . . .        repeatedly.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
 
  . . .        repeatedly.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
 
  . . .        repeatedly.
Push the button to set the display panel to .
Every time you push the button, the display panel reads
 
  . . .        repeatedly.
3-2 Setting Option Setup Method
ex) Option No.
:
Step 1
:
Enter the Option Setup mode.
1
st
Take out the batteries of remote control.
2
nd
Press the temperature button simultaneously and
insert the battery again.
3
rd
Make sure the remocon display shown as .
Step 2 : Enter the Option Setup mode and select your option according to the following procedure.
11

Setting is not required if you must
a value which has a default.
2
3
4
5
6
1
2
3
4
5
6