English - 7
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the
POWER
P
button.
Plug & Play
is available only when the Input source is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 6).
✎
The option may differ depending on country.
1
Selecting the OSD
Language
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the desired OSD (On Screen Display) language.
2
Setting up the Network
Set up your network connection. Press the
ENTER
E
button to start. If
you do not know your network set up information or want to set to it later,
select
Skip
. We suggest you skip network connection setup now and refer
to “Network menu” in the e-Manual for set up requirements and instructions,
and the Network Connection section of this manual (Page 13).
You can set up the network connection later using the Network menu.
3
Software upgrade
When network connection settings are complete, Software Upgrade is
available. Select Next to upgrade TV software. Your TV will automatically
upgrade, if your TV need a software upgrade. If you want to upgrade
later, select the Skip. For more information, refer to "Software Upgrade"
(Preference
→
Support) in the e-Manual.
✎
This may take some time, depending on network status.
4
Selecting the usage mode Press the
▲
or
▼
button to select
Home Use
, and then press the
ENTER
E
button twice.
Select the
Home Use
mode.
Store Demo
mode is for retail environments.
5
Selecting a country
(Depending on the country)
Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the appropriate country.
✎
After selecting the country in the
Country
menu, some models may
proceed with an additional option to setup the pin number.
✎
When you input the PIN number, “0-0-0-0” is not available.
✎
The option may differ depending on country.
6
Setting the
Clock Mode
Set the Clock Mode automatically or manually.
7
Selecting search options
for auto tuning
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the
channel source to memorise. When setting the antenna source to Cable, a
step appears allowing you to assign numerical values (channel frequencies)
to the channels. For more information, refer to
Channel
-
Memorising
Channels
-
Auto Tuning
.
✎
When Aerial or Cable is selected first: After all Aerial or Cable channels
are stored, the step for storing Satellite channels is displayed.
✎
When Satellite is selected first: After all Satellite channels are stored, the
step for storing Aerial or Cable channels is displayed.
✎
Press the
ENTER
E
button at any time to interrupt the memorisation
process.
8
Enjoy your TV.
If you want to watch a broadcast program, select
Close
. If you want to enjoy
the
Smart Hub
, select the
Smart Hub
. The
Smart Hub
will start. For more
detailed information, refer to “Smart Hub” in the e-Manual.
If You Want to Reset This Feature...
Select
System
-
Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”
If you want to change the PIN number, use the
Change PIN
function.
You should do
Plug & Play
(
MENU
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER
(on).
[UD6500-XE]BN68-03482G-01L05.indb 7
2011-05-09 오후 3:51:25
