Samsung UDH4400G, Руководство по обслуживанию

Страница: 44 / 79

Samsung Electronics 4-17
■
EC13 : When the trouble is found on the part related to the up & down swing motor of
indoor unit (cassette model)
Trouble Shooting
Check point :
- Wire short between indoor unit PCB up & down swing motor connector or bad contact.
- Output of indoor unit micom
- Defect of up and down swing motor
NO
YES
YES
YES
NO
Check and replace
the related part
Normal
Check and replace
wire harness?
Replace indoor unit
PCB
NO
NO
NO
YES
After check of the short circuit of harness for
connecting the up and down swing motor, operate the
set in the cooling mode and oeprate the wind direction
up and down, and then perform the test.
Perform the operation on and do the up & down
swing action on.
Is the up & down control panel norm
ally operationg?
No short or wrong connection of connection
of connector wire?
Are the voltage of pin no. 1 and 6 of indoor
unit PCB DC 12V?
Is the output of pin no. 2, 3, 4, and 5 of CN 12 and 13
of indoor unit PCB spherical?
Replace up and down swing motor
3-00216A(1)-TS 5/19/01 10:06 AM Page 4-17