Pairing the TV to the Samsung Smart Remote
When you turn on the TV for the first time, the Samsung Smart Remote pairs
to the TV automatically. If the Samsung Smart Remote does not pair to the TV
automatically, point it at the remote control sensor of the TV, and then press and
hold the buttons labelled and in the following figure simultaneously for 3
seconds or more.
Installing batteries into the Samsung Smart Remote
To install the batteries, push the rear cover open in the
direction of the arrow and insert the batteries as shown
in the figure. Make sure that the positive and negative
ends are facing in the correct direction.
- Alkaline batteries are recommended for longer
battery life.
Using the TV Controller
You can turn on the TV with the
TV Controller
button at the bottom of the TV, and then use the
Control menu
. The
Control
menu
appears when the button is pressed while the TV is On. For more information about its usage, refer to the figure below.
Control menu
: Power off
: Volume Up
: Channel Up
: Volume Down
: Channel Down
: Source
TV Controller
/ Remote control sensor
Press: Move
Press & Hold: Select
The
TV Controller
is placed at the bottom of the TV.
English - 5
UKU6500R_Asia_BN68-08088A-01_ENG.indb 5
2016-10-26 오후 1:37:25
