Samsung UA43N5000, Руководство пользователя

Страница: 14 / 68

04 Running the Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you
to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network
connection, at one time.
• Before starting the Initial Setup, be sure to connect external devices first.
You can also start the Initial Setup using the TV's menu ( MENU
m
> System > Setup ).
Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit your
viewing environment.
If You Want to Reset This Feature...
Select System → Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0000”.
If you want to change the PIN number, use the Change PIN function.
You should do Setup ( MENU
m
→ System ) again at home even though you did in shop already.
• If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0000”:
MUTE → 8 → 2 → 4 → POWER (on)
Using the TV Controller
You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu .
The Control menu appears when the TV Controller is pressed while the TV is On. For more information about its
usage, refer to the figure below.
Control menu
: Power off : Volume Up
: Channel Up : Volume Down
: Channel Down : Source
TV Controller / Remote control sensor
Press: Move
Press & Hold: Select
The TV Controller is located on the bottom
of the TV.
English - 14