Samsung UA32D6000, Руководство пользователя

Страница: 7 / 20

English - 7
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the
POWER
P
button. Plug & Play is available only when the Source is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 6).
1
Selecting a language Press the ▲ or ▼ button, then press the
ENTER E
button.
Select the desired OSD (On Screen Display) language.
(Not available in some locations)
2
Wired/Wireless
Network Connection
Set up your network connection. Press the ENTER
E
button
to start. If you want to setting to it later, select Skip . For more
information, refer to “Wired/Wireless Network Connection” in the
e-Manual.
3
Software upgrade When network connection settings are complete, Software
Upgrade is available. Select
Next to upgrade TV software. Your
TV will automatically upgrade, if your TV need a software upgrade.
If you want to upgrade later, select the
Skip . For more information,
refer to “Software Upgrade” (Preference Features
→
Support
Menu) in the e-Manual.
✎
This may take some time, depending on network status.
4
Selecting Store
Demo or Home Use
Press the
◄
or
►
button, then press the ENTER
E
button.
Select the
Home Use
mode.
Store Demo
mode is for retail environments.
To return the unit’s settings from Store Demo to Home Use (standard): Press the
volume button on the TV. When you see the volume OSD, press and hold MENU
for 5 sec.
Store Demo is only for shop display. If you select it, several functions are not able
to use. Please select Home Use when you watch at home.
5
Selecting an country Press the ▲ or ▼ button, then press the
ENTER E
button.
Select the appropriate country.
6
Selecting an area Press the
▲
or
▼
button, then press the ENTER
E
button.
Select the appropriate area. (Not available in some locations)
7
Setting the
Clock Mode
Set the Clock Mode automatically or manually.
Auto : Allows you to select a time zone.
✎
Press the
▲
or
▼
button to highlight the time zone for your local area. Press
the ENTER
E
button. (Australia only).
Manual : Allows you to manually set the current date and time.
8
Selecting a channel Select the channel source to memorise among Digital & Analogue / Digital /
Analogue . When done, select Next . Scans for a channel automatically and stores
in the TV.
9
Enjoy your TV.
If you want to watch a broadcast programme, select
Close
. If you want to enjoy
the Smart Hub , select the Smart Hub. The Smart Hub will start. For more
detailed information, refer to “ Smart Hub ” in the e-Manual.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”
If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play ( MENU → System ) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER (on).
P
POWER
[UD6400-XY]BN68-03480A-00Eng.indb 7 2011-04-04 오후 4:03:43