background image

S

AFETY

3

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, Install in accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such as radiators, heat registers, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the  polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your 
safety. If the provided plug does not fit into your outlet, consult an electrician for replace-
ment of the obsolete outlet.

10) Protect the power cord from being from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a used, caution when moving the cart/apparatus combination to
avoid injury from tip-over.

13) Unplug this apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped. 

DOUBLE INSULATED - When servicing
use only identical replacement parts.

Содержание TXP1430F, TXP1634F, TXP2022


















































Отзывы: