Samsung TW14N63/BWT, Руководство по обслуживанию, Страница: 18 / 178

Disassembly and Reassembly
Samsung Electronics
4-5
4-2-4 Lever FL Arm Ass’y Removal
1) Push the hole “A” in the direction of arrow “B”
use the pin.(about Dia. 2.5)
2) Pull out the Lever FL Arm Ass'y
Œ
from the Boss
of Main Base.
3) Remove the Lever FL Arm Ass'y
Œ
in the direction
of arrow “C”.
Œ
GEAR FL CAM
GEAR WORM WHEEL
POST
TIMING POINT
Fig. 1-7 Gear FL Cam, Gear Worm
4-2-3 Slider FL Drive, Gear FL Cam Removal
1) Pull the Slider FL Drive
Œ
to the front direction.
2) Remove the Slider FL Drive
Œ
in the direction of
arrow. (Refer to Fig. 1-6)
3) Remove the Gear FL cam
´
.
Note : When reinstalling be sure to reassemble Slider
FL drive
Œ
after you insert the Boss of Lever FL
ARM-R in Groove of Slider Fl drive
Œ
.
Assembly : Align the Gear FL Cam
Œ
with the Gear
worm wheel Post as shown drawing.
(Refer to Timing point)
Œ
SLIDER FL DRIVE
´
GEAR FL CAM
Fig. 4-6 Slider FL Drive Removal
Œ
LEVER FL ARM ASS`Y
"C"
"B"
PIN
HOLE "A"
Fig. 4-8 Lever FL Arm Ass’y Removal