1
18
Ho
w
To
Replace
W
ater
-Purifying Filter
Have a knowledge of
water-purifying filter.
USAGE
It is a parts filtering impurities that are bad for human being such as chlorine
and its smell and offensive taste contained in tap water.
It is NSF(National Science Foundation)
certified, and meets a standard require-
ment for food safety of NSF 42,53. It also passed the following standard test.
When the green lamp on icon in the display part of refrigerator turns
orange, it is recommended to replace a filter. If the color of lamp turns red
from orange, replace the filter immediately.
Certification Standard
NSF 42
NSF 53
Pathogene, insecticide, asbestos,
slime, benzol,
organic compound, mercury
Remove Capacity
Smell, Chloride
Filtrate of water-purifying filter is made from vegetable active carbon.
Purifying Effect
When to Replace
What is Water-Purifying Filter?
Filtrate and Purifying Effect
How To Replace Water-Purifying Filter
▼
▼
Separate a water-purifying filter
Open the unit grill in the upper part of refrigerator, rotate the filter by 90° to
the left (unlock), and pull it down.
Unlock
Lock
▼
3
Fit a new filter in.
Fit the filter in a fixing part, rotate it by 90° to the right(lock), and match an
indicating line( ) with Lock( ) sign.
Close an unit grill, and press ice-maker test button to check if water flows out.
It is recommended to run off water for about 2 minutes (or 2 liter) when you
install or replace a filter for the first time.
After replacing a filter, press
button for 3 seconds until the color of
lamp turns green from red.
▼
▼
▼
▼
2
Put an installing date sticker on a new filter.
Unpack the filter box, and peel off the red protective cap.
Put an installing date sticker on the new filter.
Example) If installing it in October, put on 'OCT 10' sticker.
▼
▼
Purchase a water-purifying filter from a near service center for replacement.
▼
Place a bucket little bit bigger than the filter to catch the dropping
water when separating the filter.
