E-
13
ENGLISH
Drainpipe and Drain Hose Installation
You should test the drainage after completing the installation.
Prepare a little water about 2.0 liters.
1
Turn the cover drain pump, then pull it out.
2
Pour water into the indoor unit as shown in figure.
Note
If you do not pour water inside the water supply intake,
water may spill from the indoor unit.
3
Confirm that the water flows out through the drain hose.
Note
You can check the drainage only when the air conditioner is
in cool mode.
4
Reassemble the cover drain pump.
Air ventilation
Drain clamp
Concentrated drain hose
1/
10
0
or
m
or
e
slo
pe
10
0m
m
o
r
m
or
e
Testing the drainage
Note
If a concentrated drain hose is installed, refer to the figure below.
Cover drain pump
