6
The rubber lip under the brush head can be
removed if it requires cleaning or replacing.
Lift the rubber lip in the middle and pull out of
the guides at one side.
The motor filter situated between the dustbag
and the motor wil gradually become dirty.
Each time you change the air outlet filter we
advise you to remove the motor filter and to
clean it by tapping to remove the dirt and then
replacing it in the vacuum cleaner.
The microfilter filters the air which comes out
from the vacuum cleaner.
To open the filter cover, press down and pull it
simultaneously.
Remove and replace the exhausted microfilter.
Close the cover.
CARE OF MOTOR FILTER
REPLACING THE MICROFILTER
TROUBLESHOOTING
PROBLEM
CAUSE
REMEDY
Motor does not start
Suction force is gradully
decreasing
Cord does not rewind fully
No voltage
Filter, nozzle, suction hose
or tube blocked.
Check that the cord is not
twisted or wound unevenly
Check cable, plug and socket.
Remove the object.
Pull the cord ot 2~3m & push
down the cord rewind button
TC-9015VP(DJ68-40015E) 8/9/01 8:39 AM Page 7
