background image

4-19

4. Troubleshooting

4-9. Servicing Information

4-9-1. USB Download Method

Samsung may offer upgrades for Monitor’s firmware in the future.

 

Upgrades will be possible by connecting a USB drive to the USB port located on your Monitor. 

 

Insert a USB drive containing the firmware upgrade into the 

1. 

USB port on the rear of the Monitor.
Press the 

2. 

MENU

 button to display the menu. Press the ▲ or ▼ 

button to select "Support", then press the 

ENTER

 button.

Press the ▲ or ▼  button to select "Software Upgrade", then 

3. 

press the 

ENTER

 button to select "By USB". The message 

"Scanning for USB. It may take up to 1 minute." is displayed.
The message "Upgrade version XXXX to version XXXX?  

4. 

The system will be reset after upgrade." is displayed. 

Press the ◄ or ►  to select the "OK", then press the 

ENTER

 

button.

Please be careful to not disconnect the power or remove the USB 

drive while upgrades are being applied. The Monitor will turn off 

and turn on automatically after completing the firmware upgrade. 

Please check the firmware version after the upgrades are 

complete. When software is upgraded, video and audio settings 

you have made will return to their default (factory) settings.  

We recommend you write down your settings so that you can 

easily reset them after the upgrade.

Содержание SyncMaster T23A750















































Отзывы: