Samsung SyncMaster 900NF Скачать руководство пользователя страница 84

User’s Manual

70

Information

TCO Development

SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): [email protected]

Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the 
address: http://www.tco-info.com/

Environmental requirements
Flame retardants

Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, 
or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant 
substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to 
another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs 
are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, 
due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that 
disturbances in foetus development may occur.

The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame 
retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since 
no substitutes are available. 

Cadmium**

Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium 
damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries, the colour-
generating layers of display screens and the electrical or electronics components must not contain any cadmium.

Mercury**

Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. 
The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands that mercury is not 
present in any of the electrical or electronics components associated with the labelled unit. There is however one 
exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as today there is no 
commercially available alternative. TCO aims on removing this exception when a Mercury free alternative is available.

CFCs (freons)

The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly 
of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and 
thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with e.g. 
increased risks of skin cancer (malignant melanoma) as a consequence.

Lead**

Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in 
higher doses, causes lead poisoning. The relevant TCO'99 requirement permits the inclusion of lead since no replacement 
has yet been developed.

* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.

Regulatory 

Содержание SyncMaster 900NF

























































































Отзывы: