![Samsung SyncMaster 798MBplus Скачать руководство пользователя страница 64](http://html1.mh-extra.com/html/samsung/syncmaster-798mbplus/syncmaster-798mbplus_manual_4755160064.webp)
Power Supply
AC90~264VAC,50/60Hz
Power Consumption
72W (nominal)
Dimensions (WxDxH) / Weight
401 x 414 x 378 mm / 15.8 X 16.3 X 14.9 inch (with Basic Stand)/ 13.8kg
Environmental considerations
Operating
Temperature 32°F ~ 104°F(0°C ~ 40°C)
Humidity 10% ~ 80%, non-condensing
Storage
Temperature -4°F ~113°F (-20°C ~ 45°C)
Humidity 5% ~ 95%, non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and
computer systems will provide the best operating conditions and monitor settings. In most cases,
monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Note: Design and specifications are subject to change without prior notice.
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in
your computer. Use a software utility installed on your computer to set up this feature.
State
Normal Operation
Power-off mode
EPA/ENERGY 2000
Power Indicator
Green
Green, Blinking
Power Consumption
72W (nominal)
Less than 1W
This monitor is EPA E
NERGY
S
TAR
®
compliant and ENERGY2000
compliant when used with a computer equipped with VESA DPMS
functionality.
As an E
NERGY
S
TAR
®
Partner, SAMSUNG has determined that this
product meets the E
NERGY
S
TAR
®
guidelines for energy efficiency.
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.