background image

 

Congratulations!

 

You have just purchased a TCO'99 approved and labelled product! Your choice has provided you 

with a product developed for professional use. Your purchase has also contributed to reducing the 
burden on the environment and also to the further development of environmentally adapted 

electronics products. 

 

This product meets the requirements for the TCO'99 scheme which provides for an international 

environmental and quality labelling labelling of personal computers. The labelling scheme was 
developed as a joint effort by the TCO(The Swedish Confederation of Professional Employees), 

Svenska Naturskyddsforeningen(The Swedish Society for Nature Conservation), Statens 

Energimyndighet(The Swedish National Energy Administration) and SEMKO AB. 

 
The requirements cover a wide range of issuse: environment, ergonomics, usability, reduction of 

electric and magnetic fields, energy consumption and electrical safety. 

Why do we have environmentally labelled computers?

 

In many countries, environmental labelling has become an established method for encouraging 
the adaptation of goods and services to the environment. The main problem, as far as computers 

and other electronics equipment are concerned, is that environmentally harmful substances are 

used both in the products and during their manufacture. Since it is not so far possible to 

satisfactorily recycle the majority of electronics equipment, most of these potentially damaging 

substances sooner or later enter nature. 
 

There are also other characteristics of a computer, such as energy consumption levels, that are 

important from the viewpoints of both the work (internal) and natural (external) environments. 

Since all methods of electricity generation have a negative effect on the environment (e.g. acidic 

and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics 
equipment in offices is often left running continuously and thereby consumes a lot of energy. 

What does labelling involve?

 

The environmental demands has been developed by Svenska Naturskyddsforeningen (The 

Swedish Society for Nature Conservation). These demands impose restrictions on the presence 
and use of heavy metals, brominated and chlorinated flame retardants, CFCs(freons)and 

chlorinated solvents, among other things. The product must be prepared for recycling and the 

manufacturer is obliged to have an environmental policy which must be adhered to in each 

country where the company implements its operational policy. 

 
The energy requirements include a demand that the computer and/or display, after a certain 

period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The 

length of time to reactivate the computer shall be reasonable for the user. 

 
Below you will find a brief summary of the environmental requirements met by this product. The 

complete environmental criteria document may be ordered from: 

TCO Development

 

SE-114 94 Stockholm, Sweden 
Fax: +46 8 782 92 07 

Email (Internet): 

[email protected]

 

 

Current information regarding TCO'99 approved and labelled products may also be obtained via 

the Internet, using the address: 

http://www.tco-info.com/

 

Environmental requirements

 

Flame retardants

 

Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their 

purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer 
casing can consist of flame retardant substances. Most flame retardants contain bromine or 

chloride, and those flame retardants are chemically related to another group of environmental 

toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are 

suspected of giving rise to severe health effects, including reproductive damage in fish-eating 

birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found 
in human blood and researchers fear that disturbances in foetus development may occur. 

 

The relevant TCO'99 demand requires that plastic components weighing more than 25 grams 

must not contain flame retardants with organically bound bromine or chlorine. Flame retardants 

are allowed in the printed circuit boards since no substitutes are available.  
 

Cadmium**

 

Cadmium is present in rechargeable batteries and in the colour-generating layers of certain 

computer displays. Cadmium damages the nervous system and is toxic in high doses. The 
relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens 

and the electrical or electronics components must not contain any cadmium. 

 

Mercury**

 

 

Service

Terms

 

Regulatory

 

Natural Color

 

For Better Display

 

Authority

 

 

 

Содержание SyncMaster 760 TFT







































































Отзывы: