Note
•
Select
Component
for the connection to a DVD player using the SOURCE button on the front of
the LCD Display or on the remote control.
•
Then, start the DVD Player with a DVD disc inserted.
•
A component cable is optional.
•
For an explanation of Component video, consult your DVD manual.
Connecting a Camcorder
Locate the A/V output jacks on the camcorder. They are usually found on the side
or back of the camcorder. Connect a set of audio cables between the AUDIO
OUTPUT jacks on the camcorder and the AV AUDIO IN [L-AUDIO-R] on the
LCD Display.
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and
the AV IN [VIDEO] on the LCD Display.
Note
•
Select
AV
for the Camcorder connection using the SOURCE button on the front of the LCD Display
or on the remote control.
•
Then, start the Camcorders with a tape inserted.
•
The audio-video cables shown here are usually included with a Camcorder.
(If not, check your local electronics store.)
•
If your camcorder is stereo, you need to connect a set of two cables.
Connections
