manualshive.com logo in svg

Samsung SyncMaster 400FP-3, Руководства пользователя

Поделиться
Скачать
Samsung SyncMaster 400FP-3 Скачать руководство пользователя страница 150

Change the characters Color periodically

•

Use Bright Colors with little difference in luminance.

- Cycle : Change the characters Color and background Color every 30 minutes

•

Every 30 minutes, change the characters with movement.

•

Have the images and logo cycle periodically.

- Cycle: Display moving image together with Logo for 60 seconds after 4 hours in use.

•

The best way to protect your monitor from Image retention is to turn the Power off, or
set your PC or System to operate a Screen Saver Program when you are not using it. If
these guidelines are not followed, it may affect your warranty.

Apply the Screen Pixel function on Product

•

Apply the Screen Pixel function

- Symptom: Dot with Black Color move up and down.

•

Apply the Screen Bar function

- Symptom: Horizontal / Vertical Bar with Black Color move up and down.

Apply the Screen Erasing function on Product

Information

Содержание SyncMaster 400FP-3





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды